Machesney Park sorts its non-residential land into seven districts: one office district, three commercial districts and three industrial districts. They are named in Appendix A of the village's municipal code, the zoning chapter, and a single table in section Z-59 says whether each use is permitted outright or allowed only through a special use permit. Anyone weighing commercial real estate in Machesney Park should read that table before reading a listing, because the district letters decide what a building can legally be used for.
This guide walks through what each of the seven districts is for, what the table of uses allows in each, the design and parking rules that sit on top, and the approval path when a use is not on the list. Gambino Realtors, based in Rockford, has been in business since 1923. This is a reading of the village's code as published, not legal advice. The village's planning and zoning office confirms how a specific parcel is classified.
Section Z-24 of the code lists fourteen districts in all. Seven are for farming and housing: AG Agricultural, RR Rural Residential, R1, R2, R3, R4 and MH for mobile homes. The other seven are the ones that matter for a business purchase. OF is the Office District. CN, CC and CG are Commercial Neighborhood, Commercial Community and Commercial General. IL, IG and IH are Industrial-Light, Industrial-General and Industrial-Heavy. The code's own purpose statements say what separates them.
The three commercial districts share a set of general purposes in section Z-50. They protect commercial areas from fire, explosion, noxious fumes, offensive noise, smoke, dust, odor, heat and glare that come from industrial uses. They provide areas for retail stores, offices, service establishments, wholesale business and amusement establishments. They require enough space for off-street parking and loading. And they require exterior structural surfaces and exterior areas of premises to be kept structurally sound, weatherproofed and damage-free. That last point is easy to skip past, but it is a maintenance standard written into the district's purpose, not just a design preference.
Section Z-51 then separates the three.
The Office District is a different animal. Section Z-54 says OF accommodates business and professional offices and institutional uses, that it is applied to select locations throughout the village, and that it is less restrictive than the residential districts and, generally, more restrictive than the commercial districts. In other words, the code places OF between the residential districts and the commercial ones in strictness. Professional and business offices are permitted in OF, as they are in all seven districts. A grocery store is not on the OF list at all.
The industrial trio is described in section Z-56. IL accommodates light industrial, wholesale and research establishments, and the code says it may sit close to residential neighborhoods without harming them because of its limited nature. IG takes industrial uses that cannot or may not meet the IL standards but lack the objectionable influences of IH, and the code says IG should not, where possible, be near a residential district. IH takes the heavier uses that have objectionable influences, and it is applied, as far as possible, to locations removed from residential districts by distance or by natural or manmade features.
Two rules in the code explain how a parcel lands in one of these districts. First, the boundaries come from the official zoning map. Section Z-25 refers to the original February 8, 1983 map and to an official zoning map adopted by the Village Board on April 1, 2024, which is signed by the village clerk and kept on file with the planning and zoning manager. Second, land annexed into the village does not arrive as commercial. Section Z-28 classifies annexed land as agricultural, or rural residential if it is under five acres, until the Board of Trustees adopts an ordinance giving it a district. A buyer eyeing a newly annexed parcel for a business should ask whether that ordinance exists yet, because no change in use is allowed until it does.
The heart of the commercial chapter is section Z-59, a table of 141 uses across the seven districts. A "P" means the use is permitted. An "S" means it is a special use, which requires a public hearing and an approval before it can start. A blank means the use is not listed for that district. The table also points to numbered notes in the same section with extra conditions for the uses that carry them, so the letter alone is not the whole answer.
Counting the cells shows how much each district lists. CN has 29 permitted uses and 15 special ones. CC has 72 permitted and 19 special. CG has 81 permitted and 25 special, the widest list of outright uses in the table. OF has 12 permitted and 9 special. In the industrial districts, IL has 48 permitted and 27 special, IG has 47 and 30, and IH has 47 permitted and 43 special.
A few examples show how the table works in practice. Restaurants that include a drive-through are permitted in CC and CG only, while restaurants without a drive-through are also permitted in CN. Hotels, motels and extended-stay hotels are permitted in CC and CG. Medical and dental clinics and outpatient facilities are permitted in OF, CN, CC and CG, and they appear as special uses in IL and IG.
Industrial users read the table the other way. Production, processing, servicing, testing and repair is permitted in IL, IG and IH, and so are welding shops. Warehousing, packaging and distribution is permitted in the three industrial districts and is a special use in CG. A contractor's office and shop with no outdoor storage is permitted in CG, IL, IG and IH. Microbreweries and distilleries are permitted in CC, CG and all three industrial districts. Landfills and waste transfer stations are listed in IH only, and only as a special use.
Then there are the uses that sit in the middle and carry conditions. Here is where the notes under the table matter.
Some uses come with separation distances measured from other property. Adult-use cannabis businesses may not be within 250 feet of the property line of property used for residential purposes or within 1,500 feet of a pre-existing school, day care center or similar listed facility, according to section Z-59(2). Indoor shooting ranges and massage establishments carry a 1,000-foot separation from places of worship, schools, residentially zoned property, public parks and day care facilities, and from other uses of their own kind. The code adds that massage establishments may not be open between 9:00 p.m. and 8:00 a.m. Those distances are measured against neighboring property, so the use table alone does not settle a parcel.
Temporary uses have their own permit. Carnivals, outdoor festivals with multiple vendors, farmers markets, tents used for public assembly or sales, outdoor amplified concerts with more than 50 attendees, and Christmas tree lots running more than 45 days all need a temporary use or structure permit under section Z-59(27). Construction trailers, sidewalk sales and garage sales are exempt.
The use table says what a building may be used for. A second layer of rules says what the building and its lot must look like, and this layer applies even when the use is permitted outright.
Section Z-53 sets the yards in the commercial districts. The front yard is at least 30 feet for buildings under 25 feet tall, and it grows by one foot for every two feet of height above 25 feet, capped at 60 feet. Side yards are at least five feet for buildings under 25 feet tall and grow by one foot for every four feet above 25 feet, with the same 60-foot cap. The rear yard is at least 25 feet. A corner lot's street-side yard is figured like a front yard. In CN the building height limit is 35 feet or two and a half stories, while CC and CG have no height regulations. The Office District has its own set. Its front yard is half the width of the street right-of-way, but never under 30 feet or over 60 feet, its side yards are at least six feet each with a combined 15 feet or more, its rear yard is at least 25 feet, its height limit is 75 feet or eight stories, and buildings may cover no more than 50 percent of the lot.
The industrial yards in section Z-58 are tighter at the rear. The front yard is at least 25 feet for buildings under 25 feet tall, side yards are at least ten feet, and the rear yard is ten feet, rising to 25 feet where the lot abuts a residential district. Height limits are 45 feet in IL, 75 feet in IG and 100 feet in IH. All production, processing, servicing, testing, repair or storage must take place inside completely enclosed buildings, and uses must meet the performance standards of the Illinois Environmental Protection Act.
Where a commercial or industrial lot touches an R1 or R2 lot, a 30-foot buffer applies along that shared line, not counting lines that abut a right-of-way. Inside the buffer there can be no building, no driveway or drive lane or loading area, no signage, and no accessory areas such as dumpsters, seating areas, patios, bicycle racks or communication towers. No building can go inside the buffer, so it comes off the usable depth of a lot that backs onto R1 or R2 zoning.
Commercial design standards sit in section Z-52. They apply to every new building in CN, CC, CG and OF, with public schools and colleges excluded, and they also apply to an existing building when an improvement such as a renovation, addition, reconstruction, painting or new facade treatment affects at least 25 percent of the surface area of all building elevations. A new commercial building has to meet all of the mandatory standards and at least three of six optional ones. The mandatory ones cover building materials, rooftop mechanical screening, parking areas and trash enclosures, awnings where they are used, and lighting where it applies. The optional ones cover massing and articulation, rooflines, parapet walls, roof materials, windows and entrance design.
The materials rule is specific. At least half of the facade surface has to be a combination of glass and traditional masonry such as brick, stone or wood. Exterior insulation finish systems are allowed only as an accent, on no more than half the facade and only in the upper half of the building. Metal panels are accent material, not primary, and unfinished exposed metal is not permitted. Primary, fluorescent and neon colors are barred as accent colors, awning bodies included. Rooftop mechanical equipment has to be screened from view.
Refuse areas go behind the building where practical, with self-closing solid doors or gates, and a detached enclosure is masonry on three sides. Lighting must be full cut-off, and light at a property line next to R1, R2, R3, R4 or MH zoning may not exceed 0.2 footcandles. New parking lots, car sales lots, gas stations, retail stores, restaurants, self-storage and manufacturing next to residential property must file a lighting plan with a photometric layout.
The village enforces these design rules at the permit and occupancy stages. A building permit application for a new commercial building carries a site plan, floor plan, elevations and landscape plan, and staff review them before construction. A project that fails the standards gets no temporary or final certificate of occupancy, and the village may issue a stop work order. Each day of a violation is a separate offense with a fine of 200 to 500 dollars. Industrial buildings have their own design standard in section Z-57. It permits brick, split-face block, stone and precast concrete, allows tilt-up panels only with architectural treatment, bars corrugated metal, and limits accent materials such as insulation finish systems and plastic panels to 30 percent of a facade.
Parking counts come from section Z-67, and they scale with floor area. Retail sales and personal services need one space for every 200 square feet of building area. A restaurant or tavern needs one for every 150. Professional and medical or dental offices need one for every 200. Manufacturing needs one for every 1,000 square feet plus one for each vehicle used in the business, and warehousing needs one for every 1,500 square feet plus one for each vehicle. A hotel needs one space per room plus one for every 150 square feet of meeting space, and motor vehicle repair needs three per service bay. On a change of use, the site plan rules come into play only when the new use raises the parking requirement beyond what the current lot can meet.
One more layer is the groundwater protection overlay in sections Z-60 to Z-62. It applies to properties inside the minimum and maximum setback zones around North Park PWD wells 2, 3, 4 and 5. The minimum zone is a 400-foot radius around the wellhead and the maximum zone is a 1,000-foot radius. The overlay is shown on the official zoning map on top of the base district, and where the two conflict, the more restrictive one controls. A property can be zoned CG and still be subject to extra limits from the overlay.
Before any building permit is issued or any site is used, the code requires a zoning permit under section Z-96. The fee in section Z-97 is five dollars. A certificate of occupancy comes only after all conditions of the zoning permit or any special use permit are met. A pure change of use does not need a new site plan unless it raises the parking requirement beyond what the current lot can meet.
A special use runs through a public process in section Z-88. The applicant files with the planning and zoning manager, with scale drawings of the site and everything within at least 300 feet. The fee is 100 dollars for a lot under two acres and 175 dollars for a lot of two to five acres, and the fee doubles when the use already exists. The planning and zoning commission holds a public hearing within 45 days of a complete application. Notice runs in a newspaper between 15 and 30 days before the hearing, goes up on or beside the property, and goes by certified mail to adjacent owners. The commission weighs six findings, including whether the use will harm nearby property or substantially diminish its value, whether utilities, access and drainage are adequate, and whether traffic congestion will be minimized. It sends a recommendation to the village board, and conditions can be required, including an expiration after a set period.
If a use is not on the table, section Z-92 gives a path. The planning and zoning commission decides, on the basis of similarity to listed uses, whether the unlisted use is permitted or special in one or more districts. The request is written and describes the use in detail, the determination is due in writing within 60 days unless the applicant agrees to more time, and it can be appealed to the village board within ten days. A different tool, a variation under section Z-89, relieves a practical difficulty or hardship in the physical lot. It can reduce a yard, allow a height or area over the limit by no more than ten percent, or reduce required parking. The code is explicit that the cost of strict compliance cannot be the only reason. An owner who wants a different district altogether can apply for an amendment under section Z-90, and a decision of the zoning manager can be appealed to the planning and zoning commission under section Z-87, where four concurring votes are needed to reverse it.
Before an offer on a commercial building, a buyer can use all of this as a short list of things to put in front of the village. Ask which district the parcel sits in on the official zoning map. Ask whether the intended use is a "P" or an "S" in that district and what footnote applies. Ask whether the lot is inside the groundwater overlay, and whether it backs onto R1 or R2 zoning. Ask whether the existing building was built under the design standards and what a renovation would trigger.
The zoning letters on a Machesney Park commercial property are a legal description of what it can become. Seven districts do the sorting, one table lists 141 uses, and special uses need a hearing before the planning and zoning commission. Design standards, yards, buffers, parking counts and the groundwater overlay add conditions that the table alone does not show.
A buyer who needs an everyday retail or restaurant use should look first at CC and CG, where the permitted lists are widest. A buyer whose plan involves production, repair or outdoor storage of materials should look at the industrial districts, and should expect outdoor storage to need a special use permit. Whatever the plan, confirm the district and the footnote with the village before you commit, then look at the commercial real estate in Machesney Park with that list in hand. For the surrounding rules, the village's permits process is covered in Machesney Park Permits: Fences, Sheds, Pools and Decks, the well and recharge background in Machesney Park Water, Sewer and Private Wells Explained, and a neighboring city's district list in Rockford Commercial Zoning Districts: What Each Allows. The full set of local guides is in the Illinois Real Estate Guide.
Zoning rules are spread across many sections of the code, so here are short answers to the questions a buyer would ask first.
Seven non-residential districts. The code names OF Office, CN Commercial Neighborhood, CC Commercial Community and CG Commercial General, plus IL Industrial-Light, IG Industrial-General and IH Industrial-Heavy. They sit inside a list of fourteen districts that also includes agricultural, rural residential, four residential classes and a mobile home district. The district for a specific parcel comes from the official zoning map on file with the planning and zoning manager, so confirm it with the village rather than assuming it from the land around it.
A permitted use, marked P in the table of uses, is allowed in that district once the zoning and building permits are in place. A special use, marked S, needs a hearing before the planning and zoning commission first. The commission weighs six findings, such as effects on nearby property and the adequacy of utilities and access, and sends a recommendation to the village board. Conditions can be attached, and a special use permit can carry an expiration date.
Retail sales are permitted in CC and CG. Restaurants without a drive-through are permitted in CN, CC and CG, and restaurants with a drive-through are permitted in CC and CG only. Check the notes under the table and the parking schedule for the specific use, because a restaurant needs one parking space for every 150 square feet of building area.
No. A gas station and convenience store is permitted in CN, CC and CG but needs an environmental impact statement from a qualified expert and may not sit within any of the North Park Water District's well-head recharge areas. Major motor vehicle repair is a special use in CG and the industrial districts, with enclosed-building and no-junk-storage conditions and the same recharge-area restriction. Minor repair is permitted in CG and is a special use in CC and the industrial districts.
They can. The standards apply to new buildings in CN, CC, CG and OF, and also to an existing building that undergoes an improvement affecting at least 25 percent of the surface area of all building elevations. Renovation, an addition, reconstruction, painting and new facade treatments all count. A building owner planning an exterior update should ask the community development staff before work starts.
Section Z-92 lets the planning and zoning commission decide whether an unlisted use is permitted or special in one or more districts, based on its similarity to listed uses. The request is in writing with a detailed description. The commission's written determination is due within 60 days unless the applicant agrees to more time, and the decision can be appealed to the village board within ten days. A variation or a district amendment are separate tools with their own applications.
It is a layer on the official zoning map that sits on top of the base district for properties within the setback zones around North Park PWD wells 2 through 5. The minimum zone is a 400-foot radius and the maximum zone is a 1,000-foot radius from each wellhead. A property in the overlay must meet both the overlay and its base district, and where they conflict the more restrictive rule applies. Ask the village whether a parcel is inside it.