Be In The Know

rss logo RSS Feed
Buying | 65 Posts
Real Estate News | 43 Posts
Selling | 45 Posts
October
13

Roscoe sits on the Rock River, and the village's own flood code names five waterways it regulates: the Rock River, North Kinnikinnick Creek, South Kinnikinnick Creek, McDonald Creek and Dry Run Creek. That list is the quickest way to understand flood risk in this town. It is not one river with one line on a map. It is a river and four creeks, each with its own floodplain, and a house can sit near any of them.

If you are looking at homes for sale in Roscoe, the flood question deserves an early answer, before the inspection and well before the closing table. Gambino Realtors has worked in the Rockford area since 1923, and the flood map is one of the quieter items in a purchase. Roofs, furnaces and basements get the attention. The map gets less. This guide walks through what the Village of Roscoe's code actually says, what it asks of an owner who wants to build or repair, and how flood insurance works when a lender is involved. For the same ground in the largest city nearby, see our guide to Rockford flood zones and flood insurance.

What The Village Code Says Is Mapped, And By Whom

Start with the document. Chapter 157 of the Roscoe code of ordinances is titled "Floodplains," and it runs from section 15-838 to section 15-851. Its stated purposes include preventing development from increasing flood or drainage hazards for others, protecting new buildings and major improvements from flood damage, and making federally subsidized flood insurance available. That last purpose is the reason the chapter exists in this form. A community that wants its residents to be able to buy federal flood insurance has to adopt and enforce floodplain rules, and Roscoe did.

The code defines the base flood as the flood that has a one percent chance of being equaled or exceeded in any given year, and it adds that this is also known as the 100-year flood. That phrase misleads people. It does not mean a flood that happens once a century and then leaves you alone for a hundred years. It means a one-in-one-hundred chance every single year, which over the length of a thirty-year mortgage is not a small number. The code does not make that point for you, but the arithmetic is simple enough.

The code also defines the flood protection elevation, and this is the number that matters most when anyone builds. It is the base flood elevation plus one foot of freeboard. Freeboard is a margin of safety. The village code says it exists to cover uncertainties in calculations, future development upstream, and unpredictable effects such as ice or debris jams. So a building in the floodplain is not asked to sit at the predicted flood height. It is asked to sit one foot above it.

Where does the floodplain actually lie? The code points to a specific federal document. The village's floodplains are generally identified on twelve panels of the countywide flood insurance rate map prepared by FEMA and dated February 17, 2016. The code also says the term "floodplain" includes areas of known flooding identified by the community. So the map is the starting point, and the village can also treat a place as floodplain on its own knowledge of past flooding.

The base flood elevations for the Rock River and the four creeks come from the 100-year flood profiles in the countywide flood insurance study, the same February 17, 2016 edition. For other mapped "A zone" areas where no study exists, the code says to use the best available data, and if none exists, the applicant pays for an engineering study. There is an interesting wrinkle for anyone who disagrees with the data. The code says that party must finance the detailed engineering study and submit it to FEMA and the Illinois Department of Natural Resources, Office of Water Resources, for approval before any development of the site. In other words, you can challenge the number, but you carry the cost of proving it.

Two more details are worth knowing. The first is that the village's reach is wider than its borders. The code's definition of floodplain includes parts of the unincorporated county that lie within the village's extraterritorial jurisdiction or that may be annexed into the village. The second is that a parcel can be Roscoe by mailing address and still be outside the village. The village's permit page says the way to tell is your tax bill. If the bill does not list the Village of Roscoe, you are outside the village limits, and the page directs you to Winnebago County Planning and Zoning at 815-319-4350. That matters here because Winnebago County's surface water management ordinance, which covers floodplain regulation, states that it applies to unincorporated areas of the county. Which rulebook governs your lot depends on which side of the village line it sits.

One honest limit. The code cites the 2016 countywide map. FEMA can issue newer versions, and a map in a file cabinet is not the same as the current effective one. Look up the address on FEMA's Map Service Center and confirm which map is in force. The village engineer, who administers the floodplain chapter, is required to keep base flood data and floodplain maps available for public inspection, so a call to Village Hall at 815-623-2829 is a reasonable second check.

What The Code Asks If You Build, Repair Or Add On

Here is the part that surprises owners. In the Roscoe code, "development" is a wide word. It covers building and demolition, but also repair, structural alteration, utilities, roads, levees, fences, and drilling, filling, dredging, grading, excavating and paving. Routine maintenance, resurfacing roads and gardening are excluded. So a homeowner who thinks of a floodplain permit as something only builders need can be wrong, because a fence or a grading job in a mapped floodplain falls inside the definition.

The rule is straightforward. Nobody may begin development in the floodplain without a development permit from the village engineer. The application needs scaled drawings of the site, existing grades and any changes from excavation or fill, the location and size of buildings and additions, the elevation of the lowest floor including the basement for buildings that fall under the protection rules, and a cost estimate from a licensed engineer or architect. A signed estimate from a contractor can also meet that requirement. The engineer will not issue the permit until the applicant has obtained all other federal, state and local permits that apply.

There is a useful escape hatch built into the same section. The engineer compares the site's elevation to the base flood elevation. Land that a survey shows to be higher than the base flood elevation, and that has not been filled since the site's first flood map, is not in the floodplain for purposes of the chapter. The reverse also holds. Land that sits below the base flood elevation and connects hydraulically to a flood source is subject to the chapter even if the map does not show it. The map is a guide. The surveyed ground elevation decides.

Now picture a concrete case. A buyer in a Roscoe neighborhood near one of the creeks wants to add a family room to the back of an older ranch. The map shows the lot in the floodplain. The addition is valued at more than 1,000 dollars and is larger than 70 square feet, which is the threshold the code sets for building protection. So the new space has to be protected to the flood protection elevation. The code gives three ways to do it. The building can sit on permanent fill, in layers no thicker than six inches before compaction, extending at least ten feet beyond the foundation, with the lowest floor at or above the flood protection elevation. It can be raised on stilts, piles, walls or a crawlspace foundation that is permanently open to floodwaters, with the lowest floor and all heating, cooling, plumbing and electrical equipment above that line, and with the space below used only for parking or access and never later turned into habitable room. Or it can have a crawlspace within limits, where the interior grade is no more than two feet below the adjacent exterior grade and the interior height does not exceed four feet. Each method has flood openings so water can pass through instead of building up against the walls.

Then there is the rule that catches people who do projects in stages. If improvements add more than 20 percent to the floor area, or the cost equals or exceeds 50 percent of the building's market value, the code calls it a substantial improvement and the whole existing structure, not only the addition, must meet the flood protection standard. The totals are figured cumulatively. A kitchen this year and a second story three years later can add up. The same standard applies to repairs after substantial damage, where the whole structure must comply within 24 months of the date the damage occurred.

Garages and sheds get their own, lighter test. The code allows a garage, shed or minor accessory structure on a single-family lot if it is non-habitable, used only to store vehicles and tools, outside the floodway or covered by the right state and federal permits, built of flood-resistant materials below the base flood elevation, and fitted with a permanent opening on each wall. It also has to come in under 15,000 dollars in market value or replacement cost, or under 576 square feet, which is 24 feet by 24 feet. Utilities must sit above the flood protection elevation, and flammable or toxic materials must be stored above it too. The code even adds a sentence that is worth quoting for buyers: the lowest floor elevation should be documented, and the owner advised of the flood insurance implications.

What if the rules do not fit the lot? A variance is possible, but the bar is high. The applicant goes to the zoning board of appeals, which makes a recommendation to the village board of trustees. The applicant has to show that the work cannot be located outside the floodplain, that an exceptional hardship would result without it, that the relief requested is the minimum necessary, and that no added public threat or expense follows. And the code requires the board's chairperson to notify the applicant in writing that a variance lessening building protection can raise flood insurance premiums by as much as 25 dollars per 100 dollars of coverage and increases the risk to life and property. The applicant must acknowledge that risk in writing.

The penalty section closes the loop. The fine is not less than 50 dollars and not more than 750 dollars for each offense, and each day counts as a separate offense. The village can seek an injunction, issue a stop-work order and record a notice of violation on the title of the property. The village attorney also tells the owner that the violation may cause coverage under a standard flood insurance policy to be suspended. The definitions section adds a presumption that matters at resale: a structure or development without the required permits and elevation certification is presumed to be in violation until the documentation is provided. So permit history is not only a village concern. It follows the property to the next owner.

Flood Insurance And What To Check Before You Make An Offer

Flood insurance is the part buyers most often get wrong, so take it in order. The federal flood program's own guidance says you are required to carry flood insurance if you own a home in a Special Flood Hazard Area and have a government-backed mortgage. It also says some banks require flood insurance even if the home is not in a high-risk area. That is a lender's policy, not a map rule, so the only way to know is to ask the lender early.

A regular homeowners policy does not settle the question. The federal program states that most homeowners insurance policies do not cover flooding, and that a standard policy does not satisfy a mortgage or federal aid requirement. A separate flood policy does.

The federal homeowner policy covers a building up to 250,000 dollars and contents up to 100,000 dollars according to the program's current pages. Rates are tied to the location and the property and do not vary by insurance provider, so shopping among agents for a lower federal rate will not work. Policies last one year. Coverage normally starts 30 days after purchase, with one exception that matters to buyers: there is no wait when you buy flood insurance while making, increasing, extending or renewing a mortgage. That is why the policy can be in place at closing if the order goes in on time. A buyer who waits until after closing faces the 30 days.

The zone letter helps you decide how seriously to take all this. Zones beginning with A, such as A, AE, AH and AO, are the high-risk areas where insurance is mandatory with a federally backed mortgage. Zones B, C and X are lower risk and the program recommends insurance there as well. A low-risk label is not a promise. The program reports that over the past ten years nearly one-third of its claims came from outside the high-risk zones. In a town with a river and four creeks, that number deserves a second look.

There is also a path from the map to a better price on coverage. An elevation certificate shows how high a building's lowest floor sits compared with how high floodwater is expected to get. Most homeowners do not need one, though an owner in a high-risk zone may. The program suggests asking the local floodplain manager whether one is already on file, and if not, hiring a land surveyor, engineer or architect to prepare one. In Roscoe, the village engineer is required to record the as-built elevation of the lowest floor or the floodproof certificate for buildings under the protection rules, so that is a sensible first call.

Now the buyer's own checklist, in the order we would use it. First, look up the address on FEMA's map and read the zone. Second, ask the village whether the parcel is in the floodplain or floodway and whether permits and an elevation record exist for any addition. Third, ask your lender whether flood insurance will be required and get a quote before the inspection period ends. Fourth, read the seller's disclosure report. Illinois's form asks the seller whether they currently have flood hazard insurance on the property, whether they are aware of flooding or recurring leakage problems in the crawl space or basement, and whether they are aware that the property is in a floodplain. "Aware" in that form means actual notice or actual knowledge, with no investigation required. So a "no" tells you what the seller knows, not what the map says. Our guide to the Illinois seller disclosure report explains how to read the answers.

The river itself offers a reality check. In April 2024 the Rockton-Roscoe News reported that the National Weather Service had issued a flood warning on the Rock River and that the village was offering sandbags at Roscoe Public Works. The paper reported that low-lying parts of Riverside Park near Roscoe were already flooded at about seven feet on the Rockton gauge, that banks along Edgemere Terrace began to overflow at eight feet, and that the Weather Service does not call it a flood until the river reaches ten feet, when low-lying structures on Edgemere Terrace are threatened. It also reported the record at 15.54 feet, set on March 25, 1975. That is one event, reported by a local paper, and it tells you how the river behaves in the low spots. It says nothing about the house you are looking at. Only the map, the survey and the file at the village can speak to that.

One more honest limit. Rock River flooding is not the only way water shows up. The village code's own disclaimer says larger floods may occur, and that the chapter does not imply property inside or outside the floodplain will be free from flooding. A house outside every mapped zone can still take water from a heavy rain, a failed sump or a poorly graded yard. Ask about the basement. Look at the grade. A flood policy quote costs nothing and tells you what protection would cost.

Bottom Line

Roscoe's flood picture comes down to three documents and three phone calls. The documents are FEMA's flood map dated 2016 in the village code, the village's Chapter 157 floodplain rules, and the seller's disclosure report. The calls go to the village engineer's office, your lender and a flood insurance agent. Do them before the offer is final, not after the inspection turns up a damp basement. Check whether the parcel is inside the village or in the unincorporated county, because the rulebook changes. And if you plan to add on, ask what the code treats as a substantial improvement before you design anything. When you compare homes for sale in Roscoe, read the map as closely as the listing. This guide is not legal, insurance or engineering advice, and the village engineer and your insurance agent have the last word.

That covers the rules and the risks. Here are the questions we hear most from buyers looking at river and creek-side properties in Roscoe.

Frequently Asked Questions

How do I find out if a Roscoe house is in a flood zone?

Look up the address on FEMA's Flood Map Service Center and read the zone letter. Zones that start with A are the high-risk areas. Then ask Roscoe Village Hall at 815-623-2829 whether the parcel is in the floodplain or the floodway and whether an elevation record is on file. The village code cites the countywide flood insurance rate map dated February 17, 2016, so confirm that the map you are reading is the current one. Also check your tax bill. If it does not list the Village of Roscoe, the parcel is outside the village limits and Winnebago County rules apply.

Which creeks and rivers does the Roscoe floodplain code name?

The Roscoe floodplain chapter names the Rock River, South Kinnikinnick Creek, North Kinnikinnick Creek, McDonald Creek and Dry Run Creek. Their floodways are as delineated on the countywide flood insurance rate map dated February 17, 2016, and their base flood elevations come from the 100-year profiles in the countywide flood insurance study of the same date. Other floodplains in the village use the best available federal, state or other data. A house can sit near any of these waterways, so check the map for the exact lot rather than the neighborhood.

Will my lender require flood insurance on a Roscoe home?

It will if the home is in a Special Flood Hazard Area and the mortgage is federally backed. The federal flood program also says some banks require flood insurance even when the home is not in a high-risk area, so ask your lender early. A regular homeowners policy does not satisfy the requirement because most do not cover flooding. Federal flood coverage normally starts 30 days after purchase, but there is no wait when you buy it while making, increasing, extending or renewing a mortgage, so the policy can be in place at closing.

Can I build an addition on a house in the Roscoe floodplain?

Often yes, with a development permit from the village engineer and a design that meets the code. An addition valued at more than 1,000 dollars or larger than 70 square feet must be protected to the flood protection elevation, which is the base flood elevation plus one foot. If improvements add more than 20 percent to the floor area, or the cost equals or exceeds 50 percent of the building's market value, the whole house must meet the standard. The costs are figured cumulatively, so talk to the village before you design.

Can I put a shed or garage in a Roscoe floodplain?

The code allows a non-habitable garage, shed or minor accessory structure on a single-family lot if it meets conditions. It must store only vehicles and tools, stay outside the floodway or have the right permits, use flood-resistant materials below the base flood elevation, and have a permanent opening on each wall. It must also be under 15,000 dollars in market value or replacement cost or under 576 square feet. Utilities go above the flood protection elevation. A development permit is still required in the floodplain, so call the village engineer first.

What happens if work is done without a floodplain permit in Roscoe?

The code sets a fine of not less than 50 dollars and not more than 750 dollars per offense, and each day is a separate offense. The village can seek an injunction, issue a stop-work order and record a notice of violation on the title of the property. The village attorney also tells the owner the violation may cause coverage under a standard flood insurance policy to be suspended. As a buyer, ask whether any notice of violation is recorded, and ask for the permits on any past addition in a mapped floodplain.

What does an elevation certificate show for a Roscoe house?

It shows how high the building's lowest floor sits compared with how high floodwater is expected to get. Most homeowners do not need one, though an owner in a high-risk zone may. Ask the village whether one is already on file, since the village engineer keeps the as-built lowest floor elevation for buildings under the protection rules. If none exists, a land surveyor, engineer or architect can prepare one, and a flood insurance agent can tell you whether it could change your coverage cost.

Login to My Homefinder