Be In The Know

rss logo RSS Feed
Buying | 65 Posts
Real Estate News | 43 Posts
Selling | 45 Posts
October
13

Two homes in Roscoe can sit a few hundred feet apart and answer to different governments. One is inside the Village of Roscoe. The other is not, and the rules for its fence, its shed and its permits come from Winnebago County instead. The village itself tells you how to find out which one you are: look at the tax bill.

That sounds like a small detail until you are under contract and the buyer wants a deck. If you are weighing homes for sale in Roscoe, the first question to ask about any parcel is which side of the village line it falls on, because everything that follows depends on the answer. Gambino Realtors has been in business since 1923, and this guide uses the Village of Roscoe's own pages and Winnebago County's pages to show how the two systems fit together and how to tell which one applies before you make an offer.

How To Tell Which Side Of The Line A Parcel Is On

Do not guess from the name of the road or the way the address is written. The Village of Roscoe's License and Permits page says to determine whether you are a resident of the village by looking at your tax bill. If you pay taxes to the Village of Roscoe, you live within the village limits. If the bill does not list the Village of Roscoe, the village says to contact Winnebago County Planning and Zoning at 815-319-4350 about permits. That is a clear test, and it is one a buyer can run in a few minutes.

The tax bill is the village's test, so it is worth knowing how to read one. A Winnebago County bill is a list of taxing districts, each with its own line. In the county's 2025 District Rates by Taxcode report, 15 tax codes carry a line for Roscoe Village. Those codes also carry a fire protection district line, and for most of them it is Harlem-Roscoe Fire, with a few listing Rockton Fire. A parcel that sits in the same tax code as its neighbors will show the same set of districts. A parcel with no Roscoe Village line is outside the village for tax purposes, and the village's own page treats that as the sign that the County handles the permits.

There is one trap in that report, and it catches people who assume the township name tells the story. The word Roscoe also appears as a township. The 2025 report lists at least 18 tax codes that carry a Roscoe Township line and no village line at all. Those are Roscoe Township parcels outside the village. And the codes that do carry the village line are not all in Roscoe Township either. Across the 15 village codes, the township lines include Roscoe, Harlem, Rockton and Owen. So "Roscoe Township" does not mean "in the village," and "Harlem Township" does not mean "outside it." The village line is the one to look for.

You have three practical ways to check. First, ask the seller for a recent tax bill, or look it up yourself. The Winnebago County Treasurer's parcel inquiry lets you search by parcel number, by location or by owner name, and it shows current and historical tax details. Second, use the county's WinGIS property search, which offers layers and property information along with markup and measuring tools. The village's own pages point to WinGIS for lot lines, and the county's permits page sends people there for zoning maps. Third, look at the village's online zoning map, which the License and Permits page links to. If the parcel appears on the village map with a zoning district, the village is the zoning authority for it.

Keep a record of what you find. Write down the parcel number, which taxing districts appear and what the zoning district is. The point is not to memorize the rules. The point is to know whom to call, and a buyer who can say "this parcel pays the village line and is zoned R1" gets a better answer from the village than one who says "it's on a street in Roscoe."

What Changes On Each Side

The simple version is that zoning follows the jurisdiction and building permits do not. Winnebago County's Planning and Zoning staff handle planning, zoning and subdivision matters for unincorporated Winnebago County, a job the county describes as running from large subdivisions down to garden sheds and fences. The county's page is just as plain about the other side. If the property is within village limits, the governing village provides the planning, zoning and subdivision service. So a shed in the village is a village zoning question. A shed outside the village is a county zoning question.

Building permits work differently, and this is the part that surprises people. The county's Building Division lists the villages of Cherry Valley, Durand, New Milford, Rockton and Roscoe, the City of South Beloit and unincorporated Winnebago County as the places it services. The Village of Roscoe's zoning ordinance says the same thing from the other direction. A zoning permit is required before any building permit may be issued, and Winnebago County will not issue a building permit for a structure unless it conforms to an approved zoning permit or a special use permit. The county also will not issue a certificate of occupancy until a certificate of zoning compliance has been issued. In practice, then, a project inside the village runs through two offices. The village approves the zoning side first. The county handles building permits and inspections.

A project outside the village runs through one government, but it still has two steps. The county's zoning clearance application is the zoning step, and it covers both primary structures and accessory ones. The county's own form lists a shed, pole building, detached garage, deck, patio, fence, pool, driveway, canopy and solar panels among the accessory items. The clearance expires within 60 days of issue if a building permit has not been issued or construction has not begun. Inside the village, the ordinance gives a certificate of zoning compliance 12 months before it expires without a building permit. Those are two different clocks, and a buyer who plans a project right after closing should know which one is running.

Here is a concrete example. Say you want a 150 square foot storage shed in the back yard. In the village, the Roscoe accessory structure page asks for a fee paid to the village, a signed application, a sketch with the dimensions and the distance from all property lines, and a photo or drawing of the design and materials. The village's code limits an individual accessory structure to 200 square feet, and for structures of 100 square feet or less it removes the zoning permit but keeps a five foot distance from the property line and keeps them out of the side and rear setbacks. Your 150 square foot shed is above that line, so it needs the village zoning permit. Outside the village, the same shed starts with the county's zoning clearance, and the county's form asks you to show the septic field on the site plan if the home has one.

Fences follow the same split. The village's fence page lists a permit fee, a signed application, a sketch of the dimensions and location, the material, and verification that the fence is not in an easement. Its rules say residential front and corner side yard fences may not exceed four feet and must be at least 50 percent open, while side and rear yard fences may not exceed six feet. No fence may sit in a public right-of-way or in a landscape, stormwater or drainage easement. The village allows replacement of up to 20 lineal feet of fence without a permit. Those numbers belong to the village. A fence outside the village falls under the county's zoning ordinance, which the county describes as regulating uses, setbacks, outside parking and storage, and signs in unincorporated areas. We did not read the county's fence section for this guide, so do not assume the village's four and six feet carry over. Ask the county.

One more caution about the village's numbers. The village's zoning ordinance was adopted on March 2, 2021, and the village's current permit pages show amended text in places. The 2021 document, for example, does not carry the 100 square foot threshold for structures that need no zoning permit that the current page shows. The current page is the one to rely on, and a phone call to the village confirms it. If a seller or a contractor quotes you a rule from memory, treat it as a lead to check, not an answer.

Pools and decks are covered by the same two-step logic. The village's zoning permit page lists a swimming pool, a deck, a shed or garage, an alteration or addition, a fence, a generator and ground-mounted solar panels among the things that need a zoning permit. Its code says a residential pool, and the equipment that runs it, may not sit in a required front yard or within ten feet of a property line. A pool on a parcel outside the village is a county matter. If a sale includes an existing pool, deck or addition, ask which government permitted it, because the answer tells you which office holds the record.

Utilities, Taxes And What To Ask Before An Offer

Jurisdiction decides permits and zoning. It does not by itself decide water, sewer or trash. Those depend on the parcel and on the utility that serves the street, and the village line does not map onto them neatly. North Park Water says it serves about 35,500 people in the Machesney Park and Roscoe area, with limited portions of Caledonia, Loves Park, Rockford and South Beloit. Four Rivers Sanitation Authority lists Roscoe among the communities it serves for sewer, along with Rockford, Loves Park, Machesney Park, Cherry Valley, New Milford, Winnebago and a small part of Rockton. A parcel that sits on a main will have both. A parcel that does not may have a private well and a septic system, and that matters for the permit.

The county's zoning clearance form asks how the site will be served, with boxes for well, septic, public water and public sewer. It also asks for the septic field location on the site plan. That is a sign that on a rural or edge parcel, the sequence of approvals can include the Winnebago County Health Department. The department says its inspectors oversee licensed well and septic contractors, conduct loan inspections and do site verifications. Their number is (815) 720-4100. If the home you are looking at has its own well or septic system, ask the seller for the records, and ask the health department what a site verification would look like for the project you have in mind. We cover the well and septic side in more depth in Machesney Park Water, Sewer and Private Wells Explained, and much of it applies to the same kind of parcel here.

Taxes are the other place the line matters. The village line on a tax bill is one more district that a parcel pays. A parcel outside the village does not pay it. That does not make one side better than the other, and we are not going to say either one is cheaper. The right comparison is the actual bill for the actual parcel, line by line, and the right place to read one is the Treasurer's parcel inquiry. For a general walk through the lines on a bill, see How a Rockford Property Tax Bill Is Built. The structure of a bill is the same across the county even where the districts differ.

Boundaries can also move. The village's ordinance says land newly annexed into the village is zoned Urban Transition by default unless an annexation agreement or an approved zoning designation says otherwise. So a parcel that was under county zoning last year may be under village zoning today. If a listing mentions annexation, or if the parcel sits at the edge of town, ask for the annexation paperwork and ask what the zoning was before and after. The district names matter too. The village's code uses Urban Transition, Rural Estate Residential, One-Family Residential, Two-Family Residential and a set of commercial and industrial districts, and the setbacks and accessory building limits differ by district. The village's own zoning map tells you which one applies.

The Illinois seller disclosure report will not settle any of this for you. The statutory form asks about material defects in the well or well equipment, about the septic, sanitary sewer or other disposal system, about boundary or lot line disputes and about floodplain. The word permit does not appear in it. The report cannot tell you whether an addition was permitted or which office would have permitted it. If you want the full picture of what the form does and does not cover, read Illinois Seller Disclosure Report in Rockford. The questions about permits are yours to ask, of the seller and of the right office.

That brings us to a short list of what to ask, and it is worth doing before the offer and not after. Ask for the most recent tax bill and look for the Roscoe Village line. Ask whether any structure on the property was built or changed in the seller's time, and whether it had a zoning permit and a building permit. Ask which office holds those records, the village or the county, since the answer follows from the line on the bill. Ask whether the home has public water and sewer or a well and septic. If a flood zone could touch the parcel, ask what the map shows, because the village has its own floodplain chapter in its code and FEMA's maps still apply. And if the plan involves a project, call the right office with the parcel number and the project in hand. Village Hall takes permit questions at 815-623-2829 or permits@roscoeil.gov, and the county's number is 815-319-4350. The village asks for up to two weeks for review in peak construction season, so a closing date and a project date should not be set on the same day.

Bottom Line

The village line decides which office handles zoning, and the tax bill is the village's own test for where that line falls. Inside the village, you deal with the Village of Roscoe for zoning and with Winnebago County for building permits and inspections. Outside it, you deal with the county for both. Do not assume that a Roscoe address, or a Roscoe Township label, puts a parcel in the village. Read the bill, check the map, write down the parcel number and call before you plan any work. If you are looking at homes for sale in Roscoe and cannot tell which side of the line a listing is on, make that the first question you answer, because every permit, fence and shed question after it depends on it. This guide explains what the village and the county publish. It is not legal advice, and the village and the county confirm what applies to a specific parcel.

Still sorting out which office to call? These are the questions that come up most before an offer.

Frequently Asked Questions

How do I know if a Roscoe home is inside the village limits?

The Village of Roscoe says to look at the property tax bill. If the bill shows a tax line for the Village of Roscoe, the parcel is inside the village. If it does not, the parcel is outside, and Winnebago County Planning and Zoning at 815-319-4350 handles permits. You can pull a bill from the Winnebago County Treasurer's parcel inquiry by parcel number, address or owner name. The village's zoning map and the county's WinGIS property search give a second check.

Does a Roscoe mailing address mean the home is in the Village of Roscoe?

No source we read says it does, and the village does not use the address as its test. The village points to the tax bill instead. The county's 2025 tax code report also shows that Roscoe Township parcels exist with no village line, and that village parcels sit in Harlem, Rockton and Owen townships as well as Roscoe Township. A name on a mailing label or a township label is not proof. Check the bill for the Village of Roscoe line.

Who issues the building permit for a home in the Village of Roscoe?

Winnebago County's Building Division lists the Village of Roscoe among the municipalities it services, and the village's zoning ordinance says the county will not issue a building permit unless the structure conforms to an approved zoning permit. So the village approves the zoning permit first and the county handles the building permit and inspections. Call the village at 815-623-2829 and the county at 815-319-4350 to confirm the order for your project.

Do the village's fence and shed rules apply outside the village?

No. The village's rules apply inside the village. The village limits a residential front yard fence to four feet and a side or rear yard fence to six feet, and it charges its own permit fees. Outside the village, the county's zoning ordinance governs fences and sheds, and the county's zoning clearance process applies. We did not read the county's size limits, so ask Winnebago County Planning and Zoning before you plan.

Can a parcel change from county zoning to village zoning?

Yes, through annexation. The village's zoning ordinance says newly annexed land is zoned Urban Transition by default unless an annexation agreement or an approved zoning designation says otherwise. If a listing mentions annexation, or the parcel is at the edge of the village, ask for the annexation paperwork and ask what the zoning was before and after. Confirm the current district on the village zoning map or with the county.

Does the Illinois seller disclosure report show whether work was permitted?

No. The statutory report asks about material defects in the well and the septic or sewer system, about boundary or lot line disputes and about floodplain, among other items. The word permit does not appear in it. To learn whether an addition, deck or pool was permitted, ask the seller what was built and ask the village or the county, whichever has jurisdiction over the parcel, what permits are on record.

Who do I call first if I want to build a deck or add a shed?

Call the office that has zoning jurisdiction over the parcel, which you find from the tax bill. For a parcel in the village, that is Village Hall at 815-623-2829 or permits@roscoeil.gov, and the village asks for up to two weeks of review in peak construction season. For a parcel outside the village, call Winnebago County Planning and Zoning at 815-319-4350. Have the parcel number, a sketch of the project and the distance from each property line ready.

Login to My Homefinder